|Research Areas & Activities Renewables Hydrogen Carbon-Based Energy Systems Advanced Combustion Advanced Coal CO2 Capture CO2 Storage Electrochemistry and Electric Grid Other Research Analysis Activities Technical Reports||
Carbon-Based Energy Systems > CO2 CaptureAdvanced CO2/H2 Separation Materials Incorporating Active Functional Agents
Start Date: September 2008
Yuichi Fujioka, Shingo Kazama, and Katsunori Yogo, Research Institute for Innovative Technology for the Earth (RITE)
The objective of this research is to develop an excellent CO2 separation membrane that greatly reduces the energy consumption and costs in gas separation associated with carbon capture and storage (CCS). Innovative composite materials that have both polymeric and inorganic functional agents can create interactive molecular forces that selectively extract CO2 from a gas mixture. This research will use nano-composite technology to control the composition of the pores, surfaces, and functional compounds, and study the molecular dynamics.
CCS has been proposed as a strategy to assist in reducing the levels of carbon dioxide that would otherwise be released to the atmosphere as a result of fossil fuel combustion. However, a major barrier for CO2 separation membranes has been scaling the technology so that it can be cost effective in applications beyond current market use.
There are several approaches for CO2 separation which include chemical absorption, physical absorption, cryogenic separation, and membrane technologies. Gas separation in membranes is driven by a pressure difference on either side of the membrane. Decreasing the required pressure difference by increasing the permeability of the membrane would reduce energy costs and required membrane area. However, in order to obtain a sufficiently pure stream of CO2, the selectivity for CO2 must also be high. Many current systems require cascading the permeate through multiple membrane stages to achieve the desired purity.
This research will develop polymer and inorganic membranes for carbon separation. Inorganic membranes have much better chemical and thermal stability and are used at high temperatures of 300°C or more. Polymer membranes are economical and can be produced in volume, even though they need to be operated at lower temperatures of 150°C or less. Additionally, the polymer morphology and mobility can determine the gas permeability and selectivity.
From previously funded GCEP work, it was found that the surface of carbon membranes treated with CO2 affinity agents such as alkali metal carbonate, amino acid, and dendrimers, could enhance CO2 selectivity. The study indicated that further active incorporation of CO2 affinity agents in nanopores would lead to greater CO2 selectivity and allow them to function like a CO2 molecular gate.
It was also found that the CO2 molecular gate needs a strict morphological arrangement. If the distance between two amine moieties is too small, it allowed strong hydrogen bonding of the amine moieties, and the membrane would not have sufficient CO2 permeability. On the other hand, if the distance is too large, there would not be enough carbamate ion pairs for the gate.
ApproachTo achieve these goals, the researchers will first synthesize a porous substrate, optimize the pore size and select a CO2 affinity agent. Then the team will establish techniques for preparing densely-packed active functional agents in the nanoporous substrate using the process described in Figure 2.
Simulation will guide the development process. Molecular dynamics, the Monte Carlo method, and other molecular simulation techniques will be used to predict the optimum morphology. Meanwhile process simulation will estimate the impact of an effective membrane.
The performance target for this research is to provide an excellent CO2 separation membrane for which the CO2 selectivity and CO2 permeance will be equal to or greater than 300 and 5 × 10-9 m3 m-2 s-1 Pa-1 respectively, and the CO2 capture cost is reduced to 10 US$/ton-CO2 or less for processing and distribution of CCS. These improvements in performance and cost reduction will make CO2 separation membranes a viable option for use in power generation.
Restricted Use of Materials from GCEP Site: User may download materials from GCEP site only for User's own personal, non-commercial use. User may not otherwise copy, reproduce, retransmit, distribute, publish, commercially exploit or otherwise transfer any material without obtaining prior GCEP or author approval.